Cookie Img
IC ICE Make Refrigeration Pvt. Ltd. Banner
Home » Products » Cold Room » Cold Storage

Cold Storage

Cold Storage
Cold Storage
Product Code : 06
Product Description

We manufacture of Cold Storage  that are made by advanced technology used for preserving food grade items like Dairy Products, fast foods, Frozen food, sea foods, Fruits & Vegetables, dry fruits, mineral water etc consuming less energy.


Sliding Door

  • Opening size
  • Width : 1000/ 1200/ 1500/ 1800mm
  • Height: 2100 to 3000mm
  • Thickness: 80mm
  • Panel surface material : Both side GIPP or SS as per requirement

Hatch Door

  • Opening size (WxH): 20”X20”, 24”x24”, 30”X30”
  • Different size hatch door with heavy frame for easy material movement in high turnover ice cream and dairy industries.

Pressure Ventilator

  • Tru-action pressure ventilater with/without heater to balance pressure and vacuum inside cold room.

View Port

  • 12" X 12" View port with three layer argon filled toughen glass which can be visible upto 20"C inside the cold room.

Strip Curtain

  • Semi transparent PVC strip curtain for negative temperature application to prevent heat loss and ultimately the power.

Technical specification

THICKNESS : 60,80, 100,125 & 150 mm

SURFACE MATERIAL Gl Pre-Painted Sheet, S.S. Sheet (Grade 304/316 & Surface Finish 2B & Mate), GI Plain Sheet, Plain Galvanize Iron. (Inside & Outside different metal can be placed as per your requirement).


  • For Kota stone or Concrete floor, Puf Slab with both side tar felt coated.
  • For Kota stone or Concrete floor, both side metal surface panel in which each side fits with cam
  • lock and prevent temperature loss.
  • Aluminium Chequered Plate with Marine Ply.
  • FRP Cladding on floor


  • Flush Type : Swing Door with FRP Profile, Imported Hardware, Push Type Gasket & replaceable heater for easy door operation & long life.
  • Opening Size : 24"x72",30"x72",34"x78",46"x84" (Door Opening W x H)
  • Over Lap Type: Teak wood frame with metal covering by using heavy duty hardware for better strength
  • Size : 45"x84",49"x84",54"x84", 60"X90" (Door Opening W x H)


  • Length & Width Minimum 1.78 mt and Bigger size 0.146 mt in multiples. As per requirement
  • Standard Height for 60 mm thickness 2.47 mt, 80 mm-2.51 mt,100 mm-2.55 mt, 125 mm-2.60 mt, 150 mm-2.65 mt. Single Panel Height upto 12 mt and above as per your requirement.

Technical specification of puf panel



Average PUF Density

40 ± 2 Kg/ m³

PUF Blowing Agent

141B (CFC free)

Insulation Material

Polyurethane foam

Temperature range

+90°C to -60°C

Penal Type

Discontinuous type with cam lock

M.O.C. Of Cam Locks

Cam locks body material HIPS and male latch is made of nylon Glass field with GI sheet reinforcement. Cam-lock panel joints easy assembly and leakage resistant, panel-to-panel joints.

Type Of Panel Joints

Tongue & Groove Joint with Cam lock and all side rubber gaskets

Corner Panel Available

12” X 12” X 162”(Maximum Length)

Length of wall & ceiling panel

2032 mm to 12000 mm 80” to 472.5” inch

Ceiling Suspension items with specs

MS bolt with thermal breaking cap. 4 mm thickness X 80 X 80 mm Aluminum/MS washer plate for load distribution Anchor bolt (MS) hanging bolt with 40 mm washer 2.0 mm thickness Sealing to panel MS road Clamp with an insulated crown.

Closed cell content

90 to 95%

Vapour Permeability


Water Absorption

Less than 2%

Fire Resistance

FR Grade (Fire Resistance Grade)

Compressive Strength at 10% Deformation

0.21 N/ (For PUF only)

Tensile Strength

0.58 N/ (For PUF only)

Adhesive Strength(Foam to Sheet)


Adhesive Strength (Foam to Sheet)

2.9 kg /

Panel Facing Availability

With Rib or plain on Demand (Ribs are provided for more strength)

Wall & Celling Panel Facing material

Pre Painted Galvanised sheet, Thickness 0.50mm
Plain Galvanised sheet, Thickness 0.50mm
S.S. sheet, Grade 316, 0.50mm finish 2B/ 0.6mm mate No.4

S.S sheet, Grade 304, 0.50mm finish 2B/ 0.6mm mate No.4

Floor Panel Facing Material

• PUF Panel with both side tarfelt sheet.
• PUF Panel with both side 0.5mm GIPP sheet.
• PUF Panel with outside GIPP sheet, inside 9 mm thick marine ply with 2 mm thick Aluminium Chequered Plate

Specification for Colour Coating

A. RAL No. : 9002/9003 or it's nearest
B. Indian Standard code Colour Coating : IS 14246 Galvanizing : IS 277 Base Metal : IS 513 C. Organic Coating : Type RMP (Polyester)
D. Zinc Coating : 120 GSM
E. Top Primer (Thickness in micron 'μ') : 5 +/- 1 μ
F. Top Coat (Thickness in micron 'μ') : 20 +/- 1 μ
G. Back Primer (Thickness in micron 'μ') : 4 +/- 1 μ
H. Back Coat (Thickness in micron 'μ') : 4 +/- 1 μ
I. Guard Film (Thickness in micron 'μ') : 40 +/- 3 μ
J. Salt Spray Test /Humidity Test : 750 hrs. /1000 hrs.


Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.